Description
Conoflow’s HP600 has 1/4" NPT inlet and outlet connections. Inlet and outlet gauge ports are standard. High purity internal connections and VCR, Vacuseal and Ultra Seal welded fittings are available upon request. Line and rear mounting are standard for this regulator.
Specifications
- Maximum Supply Pressure: 3000 PSIG (20.70 MPa); 5000 PSIG (34.50 MPa) available, refer to Control Engineering Data
- Control Setting Ranges:
- 2 - 25 PSIG (0.014 - 0.173 MPa)
- 3 - 50 PSIG (0.021 - 0.345 MPa)
- 3 - 100 PSIG (0.021 - 0.690 MPa)
- 4 - 150 PSIG (0.028 - 1.04 MPa)
- Proof Pressure: 150% maximum operating
- Burst Pressure: 400% maximum operating
- Flow Capacity: CV 0.15 (See Flow Graph)
- Orifice Diameter: 0.128”
- Supply Pressure Effect: 0.8 PSIG (0.005 MPa) increase for 100 PSIG (0.690 MPa) supply decrease
- Operating and Fluid Temperature Range: -40°F to +165°F (-40°C to +74°C)
- Leakage: 2 x 10-8 atm cc/sec helium (In Board and Main Valve)
- Ports: 1/4" NPTF supply and outlet. Two gauge ports at 60°. Other porting sizes and configurations available.
Downloads
